Ruby Tech VS-2400S Скачать руководство пользователя

Страница: 62 / 226

VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER

’S MANUAL Ver.A3

show dhcp

show dhcp enable/disable

4.0.3.4 Port Mirroring

Port monitoring is a feature to redirect the traffic occurred on every port to a designated monitoring port on the IP DSLAM . With this

feature, the network administrator can monitor and analyze the traffic on the entire LAN segment. In VS-2400S, you can specify one

port to be the monitoring port and any single port to be the monitored port. You also can specify the direction of the traffic that

you want to monitor. After properly configured, packets with the specified direction from the monitored ports are forwarded to the

monitoring port.

Note:

The default Port Monitoring setting is disabled.

The analysis port is dedicated as mirroring port with duplicated traffic flow from mirrored port. The ordinary network traffic is

not available for the analysis port.

Any member port is not available for this function

mirror-port

both

> <

port-id

> <

port-list

> Set port monitoring information. (RX only|TX only|both RX and TX)

Parameters

specifies monitoring rx only.

specifies monitoring tx only.

both

specifies monitoring both rx and tx.

port-id

> specifies the analysis port ID. This port receives traffic from all monitored ports.

port-list

> specifies the monitored port list.

Содержание VS-2400S



































































































































































































































Результаты поиска

Содержание VS-2400S

Отзывы:

Похожие инструкции для VS-2400S

Бренды по названию

Популярные бренды

Ruby Tech VS-2400S, Руководство пользователя

Результаты поиска

Содержание VS-2400S

Отзывы:

Похожие инструкции для VS-2400S

Бренды по названию

Популярные бренды