Ruby Tech VS-2400S Скачать руководство пользователя

Страница: 3 / 226

VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER

’S MANUAL Ver.A3

For your safety, be sure to read and follow all warning notices and instructions before using the device.



DO NOT

open the device or unit. Opening or removing the cover may expose you to dangerous high voltage points or other

risks. ONLY qualified service personnel can service the device. Please contact your vendor for further information.



Use ONLY

the dedicated power supply for your device. Connect the power to the right supply voltage (110V AC used for

North America and 230V AC used for Europe).



Place

connecting cables carefully so that no one will step on them or stumble over them. DO NOT allow anything to rest on

the power cord and do NOT locate the product where anyone can work on the power cord.



DO NOT

install nor use your device during a thunderstorm. There may be a remote risk of electric shock from lightning.



DO NOT

expose your device to dampness, dust or corrosive liquids.



DO NOT

use this product near water, for example, in a wet basement or near a swimming pool.



Connect ONLY

suitable accessories to the device.



Make sure

to connect the cables to the correct ports.



DO NOT

obstruct the device ventilation slots, as insufficient air flow may harm your device.



DO NOT

place items on the device.



DO NOT

use the device for outdoor applications directly, and make sure all the connections are indoors or have waterproof

protection place.



Be careful

when unplugging the power, because it may produce sparks.



Keep

the device and all its parts and accessories out of the reach of children.



Clean

the device using a soft and dry cloth rather than liquid or atomizers. Power off the equipment before cleaning it.



This product is

recyclable

. Dispose of it properly.

Содержание VS-2400S



































































































































































































































Результаты поиска

Содержание VS-2400S

Отзывы:

Похожие инструкции для VS-2400S

Бренды по названию

Популярные бренды

Ruby Tech VS-2400S, Руководство пользователя

Результаты поиска

Содержание VS-2400S

Отзывы:

Похожие инструкции для VS-2400S

Бренды по названию

Популярные бренды