REP
Hitch Tent™ Manual
P a g e
|
6
3)
Remove the hairpin and clevis pin
from the leg top and set aside.
4) Loosen the leg width adjustment knob
(Circled in image right).
5) Slide legs apart to match the with of
the hinge brackets at the end of the cross
bars.
6) Verify the Knobs are facing Up (or
away from the center)
7) Roughly insert the leg tops into both
brackets. Don’t worry about pin
alignment yet, just ensure both leg tops
are centered in the hinge brackets.
9)Align the hole in the leg top with the round
hole on the center bracket.
