REP
Hitch Tent™ Manual
P a g e
|
2
Hitch Tent Assembly Instructions:
Included in your new Hitch Tent
package is everything required for
assembly and install. To begin please
verify all parts are present.
A)
Cross Bar
B)
Cross Bar w/ Locking Bracket
C)
Main Column w/ two Center
Brackets
D)
Left Leg Complete
E)
Right Leg Complete
F)
RubiConX Complete w/ silent
hitch pin
G)
Hitch Ball
H)
5/32” Allen Key and Small 3/8” Open ended wrench (In parts kit)
I)
8 M8x1.25 x 45mm Long Hex Head Bolts; 23Zero replacement hardware (in parts Kit)
____________________________________________________________________________________
Section 1 – Assembly and Installation
Part one: install the hitch ball in the end of the main support column.
1)
3)
2)
Note: Hand tight is sufficient for this component.
Occasionally check that it is still tight during use.
_____________________________________________________________________________________
