REP
Hitch Tent™ Manual
P a g e
|
15
3)Pull up on the ball to allow the flange nut to pass through the
keyway in the Pivoting Support Side of RubiConX.
4) Once the flange nut passes through the keyway,
RubiConX will open, allowing installation or removal of
accessories such as Hitch Tent.
5) Bring your Hitch Tent, with RTT attached, near the
open RubiConX to connect the two.
6) Lift the ball of your Hitch Tent into the area between the
Delrin retainer pads. This doesn’t need to be perfectly
aligned, there is about 35 degrees of lateral, and 50 degrees
of vertical flexability.
