From inside the shed, install four
Screws (AA)
into the roof at each side wall location.
Note: The screws also have to go through the Roof Brace (RB) at each end to properly secure the roof!
A second person on the outside of the shed should hold down the edge of the roof firmly at each screw location.
d.
Make sure middle location
Repeat Roof (M)
is positioned tightly against the back
Repeat Roof (M)
section.
Install
Roof Pins (FF)
in four places. If necessary, use
Roof Pin Assembly Tool (GG)
to pull the roof down.
c.
GG
FF
1. Insert pin in slot.
2. Push all the way through.
3. Rotate head flush with roof.
M
Install roof pins four places.
RB
AA
(4)
click
19
