Specifi cations (Extract)
EN-34
Manual | TouchMonitor TMR7-Radio | TMR7-Mount
Specifi cations (Extract)
System
General
Power requirements:
+24 V DC (2 A overcurrent protective device shall be installed!)
Current drain:
1 A nominal current, 2.5 A power-up current (10 μsec.)
Power dissipation:
approx. 8.5 W
Display:
7“ TFT touch screen 16 : 9 (800 x 480 pixel)
Connectors:
1 x 4-pin locking low voltage typ 710 (DC)
2 x USB A; USB 2.0 Full Speed connectors for:
• USB sticks for preset export and import, software updates
• external computer mouse or Wacom® graphics tablet
1 x GPIO (RJ-12-6P6C, for remote control of defi ned functions)
1 x LAN (RJ-45)
2 x XLR-F (2 x AES3 In)
2 x XLR-M (2 x AES3 Out)
Dimensions (W x H x D): 198 x 139.5 (163) x 46 (95) mm (with table-stand)
Weight:
approx. 2.7 kg (without power supply)
Operating temperature: in the range from +5° to +40° C
Functions
• Operating using a fi nger (touch screen), mouse, or tablet
• Instruments can be freely scaled and randomly positioned
• Multiformat 4-ch. PPM (2-ch. Stereo, 2 x 2-ch. Stereo, single)
• Loudness-Meter: EBU R128, ITU-R BS.1770-4/1771-1,
ATSC A/85, ARIB, OP-59, AGCOM, CALM Act, LEQ(M),
TASA,
SAWA
•
SPL-Meter
• Loudness Test Time Control
• Loudness Range instrument (LRA)
• Loudness Chart instrument
• Moving Coil instrument (BR, VU, Loudness, BBC mode)
•
Stereo
Correlator
• 31, 61, and 122 band spectrum analyzer
• 2-channel Audio Vectorscope
• AES3 status monitor
•
Numerical
displays
• 5 preset defi nable
Digital Inputs
Inputs:
2 AES3 inputs (transformer balanced, 110
),
2 XLR-F connectors, 3-pin
Sampling rates:
44.1, 48, 96 kHz, synchronisation to digital input signal or
internal clock
Digital Outputs
Outputs:
2 AES3 outputs, XLR-M connector, 3-pin
Sampling rates:
referenced to digital inputs or internal clock
