
EN-11
Manual | TouchMonitor TMR7-Radio | TMR7-Mount
Installation
EN
Installation
The TouchMonitor
TMR7-Radio
table-top unit is designed for free
positioning on tables, desks, et. al. The panel-mount version
TMR7-
Mount
is designed for panel-mounting e. g. into mixing consoles. All
necessary power supply voltages are supplied through the +24 V DC
- 1 A connector. Use with power supply model ATS 065T-P/A240,
manufactured by Adapter Technology Co Ltd. (which is the external
power supply unit RTW
1178-R
wide voltage power supply, included
in TMR7-Radio package, optional for TMR7-Mount). The units fea-
ture a 7“ VGA 16 : 9 touch screen.
Optional an external computer mouse or a Wacom® graphics tablet
can be connected to one of the USB interfaces.
The other ports and interfaces are connected with the appropriate
standard connection cables.
ATTENTION – Please read before installing:
• Before installing the unit please study the safety instructions and
the information on connection and pin assignment.
• An external overcurrent protective device (2 A max.) shall be
installed when using an external 24 V DC power supply!
• Make sure that the delivered power supply unit is not connected.
• Place or mount the unit at a suited place.
• Connect your signal sources and all your other components to the
appropriate connectors, using the correct standard connection
cables for the components. Take care about the pin assignment!
• Finally, connect the locking 4-pin low voltage connector of the ex-
ternal power supply to the +24 V DC - 1 A connector on the rear.
Connect the external power supply to mains.
• The TouchMonitor will initiate its system startup sequence. After
the boot-up the unit is ready for use.