RTW SurroundMonitor 10600, Руководство по эксплуатации

Страница: 210 / 300

RTW SurroundMonitor 10600 210
RTW SurroundMonitor 10660-VID
E 4.5.1 Changing RTA Parameters
It is possible to customize many of the display parameters shown in the RTA.
To access the respective menu from normal display operation please
proceed as following:
1. Press and hold the currently marked MODE/SET button until the unit
changes to main menu mode.
2. Use Up or Dwn key to set the red cursor on the Modify Preset option and
enter this selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to highlight the Primary Function option for Multi
Instrument 1 . Press the Sel (SELECT) key repeatedly until RTA is shown.
4. Use Up or Dwn key to highlight the more .. option (one line below). Press
the Sel (SELECT) key to enter the RTA menu page.
5. Make the appropriate changes.
Note:
For details about the available parameters please refer to the accor-
ding topics in Chapter E 5.2.7.3: more .. for Primary Function: RTA
(RTA menu).
6. When done, press Quit to enter the Save Preset screen.
7. If you want to discard any changes, press Quit again to leave menu mode
without changes. If you want to save your selection in a user preset, use
Fig. E 4-15: RTA menu display with RTA parameters
See Chapter E 5.2.7.3
E 4 Display Modes • E 4.5 RTA Display