RTW 10689, Руководство по эксплуатации

Страница: 146 / 186

RTW DigitalMonitor 8ch 10689 146
E 5.2.2.2 Dig-Errors
After pressing Sel on the Dig-Errors option of the PPM-Digital menu, the
following submenu is displayed:
Resolution 24 Word width for analysis from MSB: 16 - 24 bit
Over -Samples 4 Number of consecutive samples with a
value defined by -Sens for over-display:
1 - 15 samples
-Sens Fscale Threshold for overload detector sense:
Fscale, FS-1 LSB, FS-2 LSB, –0.1 dB,
–0.5 dB, –1.0 dB, –2.0 dB, –3.0 dB
Mute -Check OFF Mute-check condition (digital zero):
OFF, TIME (see next line), SAMPLE
-Time 50ms Sequence length for digital zeros
before activating MUTE display:
50 ms, 100 ms, 200 ms, 300 ms
-Samples 5 Number of consecutive samples with a
value zero before activating Mute display:5
to 80 samples in steps of 5 samples
Indication 1.0s Hold time for digital error display:
1.0 s or Manual (permanent display until
manual reset).
Fig. E 5-5: The Digital-Errors submenu
on Modify Preset menu (Fig. E 5-2):

( Up ), Dwn to more ..,

Sel to open PPM-Digital menu

( Up ), Dwn to Dig-Errors,

Sel to open Digital-Errors menu
E 5 Menu • E 5.2 Modify Preset