RTS DV-3140UV, Руководство пользователя

Страница: 14 / 48

Professional
4
FM Transceiver
BATTERY INFORMATION
▼Do not recharge the battery pack if it is already fully charged. This may shorten the life of the
battery pack or damage the battery pack.
▼Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.
1. Plug the AC adaptor into the AC outlet, and then
plug the cable of the AC adaptor into the DC jack
located on the back of the Charger. The Indicator
lights orange (1s) and then goes out----waits to
charge.
2. Plug the battery or transceiver into the charger.
Make sure that the battery terminals are in contact
with charging terminals well. The Indicator turns
into twinkling red-----Pre-charging begins.
3. After pre-charging for about 5 minutes, the indicator
will stop twinkling----charging begins.
Ac Input
4. It takes approximately 4 hours to fully charge the battery. When the lamp lights green, the charging
is finished. Remove the battery or the transceiver equipped with battery from socket.
How to Charge
WARNING:
When keys, ornamental chain or other electric metals contact with the battery terminal, the battery
may cause damage or hurt bodies. If the battery terminal short circuit it will generate a lot of heat.
Take care when carrying and using the battery. Remember to put the battery or radio into insulated
container.Do not put it into metal container.