RTS DV-3140UV, Руководство пользователя

Страница: 33 / 48

Professional
FM Transceiver
23
Once transceiver works abnormally for wrong operations or wrong programming, user can start this
function to resume all functions and channels as Factory Default.
Turn off transceiver, hold pressing the programmed key of "Initialize" and power on transceiver, until
LCD displays "RESET", release the key, transceiver emits "DU" beep, all the functional setup and
channel setup resume to factory default.
This feature will copy the programmed data and parameters from the master unit to slave units. It
copies the parameters and memory program settings.
Connection: Use optional CP04 cloning cable, connect Read/write frequency port on both master
and slave, setting and programing as the requirement below.
[Settings: Master side]
11 Press the programmed key of "Clone" to Power on, the display shows "CLONE", the master unit
enters into copy mode .
21 Press PTT key, the display appears "CLONE XX" XX stands for the data amount being cloned.
31 When the data transfer is completed, slave unit restarts, the master unit display appears "CLONE".
Cloning Cable
NOTE: This function is default off, if need to open this function, please contact with dealer or edit by
PC software.
Resume Factory Default
SHORTCUT OPERATIONS