RTS DKP 16 CLD Скачать руководство пользователя страница 130

Страница: 130 / 232

120 KP 32 CLD Menu System

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

Menu System, RVON Offers (Only available with the RVON-2 option card
installed)

The

RVON Offers

menu item is used to configure the matrix connection when the RVON-2 option card is installed. It is also

used to configure which RVON channels can be used for Aux Input.

RVON-2 Option Card Matrix Connection

NOTE:

You can only have one (1) frame connection at a time.

There are three (3) ways to connect to the matrix:

AIO

AIO-8, AIO-16, Cronus. When the AIO connection is used, both RVON Ch1 and Ch2 are available as

Aux Input Channels

Use the Frame connection on the back panel of the keypanel.

RVON-2

RVON-16, RVON-8, RVON-C, RVON-I/O (in remote mode) You can only use RVON channel 1 when

connecting to the matrix using the RVON-1. Use the VoIP connection on the RVON-2 option card.

RVON-I/O

RVON-16, RVON-8, RVON-C, and RVON-I/O (in local mode). Use the Frame connection on the back

panel of the keypanel.

NOTE:

For more information about RVON-I/O configuration, see the RVON-I/O user manual (93507772000).

RVON-2 Option Card Matrix Port Configuration

With the RVON-2 option card installed in the CLD family of keypanels, you can have up to two (2) additional full-duplex
audio channels that can be mixed with audio in the CLD keypanel.

NOTE:

RVON channel 1 can be used for either the matrix connection or as an Aux Input/Output. However, it cannot be

used as both at the same time.

configure the Matrix connection port

, do the following:

On the KP 32 CLD keypad, press

MENU



The Top Level menu appears

Using the 3(



) or 6(



), select

RVON Offers

Press the

SEL

button.



Keypanel and Aux Input appear in the display window.

FIGURE 35.

RVON Offers Top Level Menu Option

Содержание DKP 16 CLD









































































































































































































































Результаты поиска

Содержание DKP 16 CLD

Отзывы:

Похожие инструкции для DKP 16 CLD

Бренды по названию

Популярные бренды

RTS DKP 16 CLD, Руководство пользователя

Результаты поиска

Содержание DKP 16 CLD

Отзывы:

Похожие инструкции для DKP 16 CLD

Бренды по названию

Популярные бренды