RTS DBP 4F, Техническое руководство, Страница: 62 / 98

62 en | Menu Structure DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
i
Notice!
If a PIN already exists, you are able to enable or disable the PIN entry. However, after
enabling the PIN entry when there is an existing PIN, when exiting the menu a prompt asks for
the PIN before enabling authentication. This is to prevent accidental lockout.
9.5.2 Set PIN
Use the Set PIN menu item to set a security PIN code for the belt pack menu. The PIN is made
up of a sequence of talk key button presses. When enabled, entry of this PIN is required to
access the DBP menu structure.
PIN length can be 1 to 8 characters.
To set the PIN , do the following:
1. Navigate to the Authentication Menu item (Setup | Authentication).
2. Press the SEL/MENU button .
3. Navigate to Select PIN .
4. Press the SEL/MENU button .
The field displays <Use A-D keys>.
5. Press the sequence for the PIN to finish entering the PIN.
6. Press the SEL/MENU button .
7. Press the CLR/BACK button to exit the screen .
A Save? prompt appears on the screen.
8. Press the SEL/MENU button to confirm.
A confirm PIN window appears.
9. Enter the newly created PIN .
10. Press the SEL/MENU button .
The Confirm PIN window closes and the PIN is saved.
i
Notice!
If you leave this menu without enabling authentication or without changing the PIN, then you
do not have to confirm the PIN.