RTS DBP 4F, Техническое руководство, Страница: 11 / 98

DBP Digital Beltpack Cabling | en 11
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
4 Cabling
4.1 To OMS
i
Notice!
PoE is not necessary as long as it is on a network that can reach the DBP.
To cable the DBP to an OMS main station , do the following:
1. Using a CAT-5e cable, attach one end to the PoE IN connector on the DBP.
2. Connect the other end of the cable to an approved PoE switch.
3. Using a second CAT-5e cable, connect one end to the approved PoE switch .
4. Connect the other end to the OMNEO connector on the OMS device.
PoE Switch
i
Notice!
If using IPedit to configure the connection between the DBP and the OMS, a third cable is
needed to connect the OMNEO port to the PoE switch.