LET’S GET STARTED WITH THE ASSEMBLY
The assembly of this structure is really easy and should not take too long.
Start by gluing the six feet (
J 1-6
) to the three legs (
H 1-3
). The stubs of the legs will
fit into the slots of the feet. You can apply some gentle pressure to ensure a snug fit.
Make sure that the feet are at a right angle to the legs before the glue sets. Allow the
glue to set properly before you proceed.
Lay out the five benches on your work surface in the order that they fit onto the legs.
The diagram and photo above will assist you in this. Now you can proceed to glue
the front bench (
G 1
) to the three legs (
H 1-3
). Now you can continue to glue one
bench after the other (
F 1
to
C 1
) to the legs. Apply gentle pressure to each bench to
ensure a snug fit.
Now you can glue the backrest (
B 1
) into the rear slot of the bench right at the back
(
C 1
). Lastly you can glue the trellis (
A 1
) to the rear of the bleacher. There are four
slots at the back of each leg where the nubs of the trellis will fit into.
FINISHING & BRANDING
We leave the finishing to your imagination and your taste. Do whatever you think will
transform this into a structure that will compliment your race track diorama.
CONCLUSION
We sincerely hoped you have enjoyed this assembly and finishing. Please remember
to give us some feedback and either send or post some pictures of this product on
your track.
