RTRMAX TM400-RTM156, Руководство пользователя

Страница: 5 / 12

CHUCK
This tool provides fast bit changing without using chuck key.
SCREWING BITS
Always use the bits adapter, when operate with screwer bits. For screwing, rotate the torque
control to drill bit symbol.
OPERATING
Always use the correct supply voltage.
The voltage of the power source must agree with the value given on the nameplate of the
machine. Machines designated for 230V can also be operated with 220V.
SWITCH ON/OFF
Switching on: Press the on- off switch
Switching off: Release the on- off switch .
CONTINUOUS OPERATION
Push the variable speed switch trigger and at the same time push the continuous
operation lock.
The stop continuous operating, push variable speed switch and then release.
SPEED ADJUSTING WITHOUT STEP
The tool speed can be changed by pressing on/off switch. If the on/off switch trigger is pushed
slightly, it provides low speed. So the tool can be controlled easily. Do not force the tool as
far as stop it.
ROTATING SPEED SELECTION
Required rotating speed can be adjusted by selecting.
Required rotating speed depends on material and it can be determined best by trying.
After working low rotating speed for cooling the tool, run the tool no-load about 3 minute.