14
Configuration Parameters
Use the Device Configuration Editor to change the configuration parameters from their default settings. To
change an entry, move the mouse pointer to the parameter, select it, and type the new value. When
finished, click on the Download button to write the configuration file to the target device. The
VIK2K1.CFG
configuration file parameters are:
ipaddress, ipaddress_b, ipaddress_c, ipaddress_d
These IP address parameters specify the Ethernet IP address used to communicate with the node
processor card(s). The format of an IP address is
nnn.nnn.nnn.nnn
, where
nnn
can be any
number from 0 to 255. The Ethernet IP address must match the IP address assigned to the device
in the NetArrays Project Tag Database Manager (Default address: 89.89.89.89). Enter the IP
address specified in the device configuration for the target node, otherwise leave default value
0.0.0.0. Please note that the IP address cannot contain leading zeros: e.g. 089.089.089.120 is not
a valid IP address.
These entries define up to four IP addresses:
