rtd cpuModules CMA34CR, Руководство пользователя

Страница: 2 / 102

ii CMA34CR cpuModule BDM-610000083 Rev L
CMA34CR cpuModules™ User’s Manual
RTD Document Number: BDM-610000083 Revision L
Copyright © 2009-2018 RTD Embedded Technologies, Inc. All rights reserved.
Trademarks
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”,
cpuModule, dspFramework, dspModule, eBuild, expressMate, ExpressPlatform, “MIL Value for COTS prices”, multiPort,
PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN,
HiDANplus, RTD, the RTD logo, and StackNET are registered trademarks of RTD Embedded Technologies, Inc. (formerly
Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are
trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104, PCI/104-Express and 104 are trademarks of the PC/104
Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual,
or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified
to service electronic equipment. Contents and specifications within this manual are given without warranty, and are
subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this
manual, or for any loss, damage, or injury in connection with the use of this manual.
Revision History
Revision Date Reason for Change
A 10/8/2014 Initial release. Added test results and made corrections throughout
B 10/23/2014 Updated Operating Temperature table with Quad Core temperature ranges.
C 11/19/2014 Removed unused sections, updated IDAN pinouts and back panel picture
D 12/17/2014 Updated temperature ratings, increased Serial UART from 64 to 512
E 1/14/2015 Updated Dual RS-422 Mode Table 24.
F 2/5/2015 Corrected “Disable Bus-Stack Error” Jumper setting
G 2/13/2015 Changed the ref designator for Fan Power connector, updated Sandra version, updated table 23.,
Added dimensioned IDAN drawing.
H 3/16/2015 Updated Dual RS232 mode pinout table, added a note to the PCIe connector
J 8/25/2016 Updated the block diagram to show the Type 2 connector on the bottom
K 11/4/2016 Removed reference to drive in Watchdog Timer section. Removed incorrect I/O port from Table 49.
Added Power Differences to Migrating section. Changed USB and Utility Port connectors to include
Shield Ground. Added MTBF. Corrected spelling errors in Table 2. Corrected IDAN COM Port pinout.
Corrected default mode of SATA controller to AHCI. Updated Reset Register definition. Added serial
port sections on Non-Standard Baud Rates, FIFO Size, and THRE Enhanced Mode.
L 9/27/2018 Corrections to Introduction:
- The top-side PCIe/104 connectors has one PCIe x4 link (not two)
- Correct temperature of MTBF specification to 30C (not 23C)
Corrections throughout:
- Remove 16GB ordering option
- The Trusted Platform Module is now included on all ordering options