rtd BDM-610000075, Руководство пользователя

Страница: 28 / 120

20 CMX32M cpuModule BDM-610000075 Rev B
Connecting to the Stack
The bus connectors of the cpuModule are simply plugged onto a PC/104 stack to connect to other devices.
Follow the procedure below to ensure that stacking of the modules does not damage connectors or electronics.
For mechanical dimensions, including board-to-board spacing, see Physical Dimensions on page 93.
1. Turn off power to the PC/104 system or stack.
2. Always work at an ESD protected workstation, and wear a grounded wrist-strap.
3. Select and install stand-offs to properly position the cpuModule on the stack.
4. Remove the cpuModule from its anti-static bag.
5. Check that pins of the bus connector are properly positioned.
6. Check the stacking order; make sure all of the busses used by the peripheral cards are connected to the
cpuModule.
7. Hold the cpuModule by its edges and orient it so the bus connector pins line up with the matching
connector on the stack.
8. Gently and evenly press the cpuModule onto the PC/104 stack.
WARNING
Do not force the module onto the stack! Wiggling the module or applying too much pressure
may damage it. If the module does not readily press into place, remove it, check for bent pins or
out-of-place keying pins, and try again.