rtd BDM-610000075, Руководство пользователя

Страница: 15 / 120

BDM-610000075 Rev B Chapter 1: Introduction 7
– Wake events include:
•
aDIO Interrupt
•
Wake-on-LAN
•
Real Time Clock
•
COM port Ring
•
Power Switch
•
etc.
•
Network Boot supported by Intel PXE
•
Y2K compliant Real-Time Clock (external battery required)
•
Nonvolatile storage of CMOS settings without battery
•
Advanced Watchdog timer
•
Complete PC-compatible Single Board Computer
I/O
•
SVGA controller Onboard with 3D Acceleration
– Intel Graphics Media Accelerator 4500MHD
– Generation 5.0 graphics engine with 10 cores
– Dynamic Video Memory (up to 256MB)
– DirectX 10 Support
– Supports Windows Vista Aero “Glass” Effects
– Analog SVGA Output
– LVDS Flat Panel output
•
Two Gigabit Ethernet
– Intel 82567LM PHY + ICH9M Controller (PRO1000 Series)
– Intel 82574IT Controller (PRO1000 Series)
– 10/100/1000 Auto-negotiation
– Jumbo Frame Support (9kB)
– PXE network Boot
– Smart Speed operation for automatic speed reduction on faulty cable plants
– Automatic MDI/MDI-X crossover capable
•
Software-configurable RS-232/422/485 serial ports
– 16550 compatible UARTs for high-speed
– 120 Ohm Termination resistors for RS-422/485 through BIOS Configuration
– Each serial port connector can be configured as two limited serial ports, for a total of four serial
ports
– Fully jumperless configuration
•
Advanced Digital I/O (aDIO)
– One 8-bit bit-programmable I/O with Advanced Digital Interrupt Modes
– One 4-bit port programmable as input or output
– Event Mode Interrupt generates an interrupt when any input bit changes
– Match Mode Interrupt generates an interrupt when input bits match a preset value