Real Time Automation, Inc.
36
1-800-249-1612
1)
The dropdowns next to
Filter View By
allow the data points table to be filtered so that only the data
points assigned to a specific group or device are displayed. Reference the Web Interface Group
Configuration for more explanation.
a)
To remove the applied filter, select
All
from the dropdown.
b)
Only one filter can be applied at a time.
2)
To individually disable data points, uncheck the
Enable
checkbox. This will omit that data point from
the generated XML/JSON.
NOTE
: Attempts to write to a disabled write data point will generate an error in the
gateway.
3)
Enter a
Name
for the data point. This name will be used in the XML/JSON and must follow the
following rules:
a)
Consist only of alphanumeric characters and the underscore character, no spaces.
b)
Length between 1 and 32 characters long
c)
Be unique among those assigned to a specific
Device
.
d)
Not begin with the string “XML”.
e)
Reserved names of “DeviceName”, “GroupName”, “dataTimeStamp”, and “Diagnostics” may not
be used.
NOTE
: Although the data point names are treated as case-insensitive, the capitalization will be
maintained in the generated XML/JSON as it was originally entered on this page.
4)
After a name is entered, a verification check will run on this page to determine if the entered name
is “valid”. If a name is entered that fails one of the crite
ria described above, a popup message will
appear.
