RSTEEL RVL-N Single, Техническое руководство

Страница: 18 / 20

18 www.repo.eu Technical Manual - RVL-N Single Wire Loop Box v16.5.2014
The RVL wire rope loop must be attached securely so it cannot move during casting of the concrete. At the RVL
wire rope loop the concrete must be compressed carefully. The RVL wire rope loop cannot be vibrated.
The RVL wire rope loops may be fastened to formwork with nails or by magnets. The part of the wire rope which
enters the concrete element is installed amidst the reinforcement. The wire rope doesn’t have to tied to the reinfor-
cement.
7 iNstaLLatioN
8 sUpeRVisioN oF
iNstaLLatioN
Check list before casting:
- RVL wire rope loop is in good condition
- RVL wire rope loop is according to designs and in the right place
- RVL wire rope loop is attached firmly
- the required additional reinforcement is installed
During the casting:
- RVL wire rope loop stays in the right place
- the concrete is thoroughly vibrated around the RVL wire rope loop
After the casting:
- the situation of the RVL wire rope loop is according to designs
- the tape covering the steel box is removed at the factory after the concrete is hardened.
18
7.1 AttAChmEnt to formwork
8.1 InstAllIng thE rvl wIrE ropE loops
The RVL wire rope loop must be attached securely so it cannot move during casting of the concrete. At the RVL
wire rope loop the concrete must be compressed carefully. The RVL wire rope loop cannot be vibrated.
The RVL wire rope loops may be fastened to formwork with nails or by magnets. The part of the wire rope which
enters the concrete element is installed amidst the reinforcement. The wire rope doesn’t have to tied to the reinfor-
cement.
7 iNstaLLatioN
8 sUpeRVisioN oF
iNstaLLatioN
Check list before casting:
- RVL wire rope loop is in good condition
- RVL wire rope loop is according to designs and in the right place
- RVL wire rope loop is attached firmly
- the required additional reinforcement is installed
During the casting:
- RVL wire rope loop stays in the right place
- the concrete is thoroughly vibrated around the RVL wire rope loop
After the casting:
- the situation of the RVL wire rope loop is according to designs
- the tape covering the steel box is removed at the factory after the concrete is hardened.
18
7.1 AttAChmEnt to formwork
8.1 InstAllIng thE rvl wIrE ropE loops
7. Installation
8. Supervision of Installation