MEMS Digital Inclinometer System with Android
Instruction Manual
ICM0099A
26
4.3.10 A
DD
R
EADINGS
–
D
ELETE AND
C
ONFIGURE
The user accepts the displacement reading as the probe ascends or descends to different
depths. During this data collection process, the user may require changes to the data
collection. The delete and configure icon, located at the top of the top status bar, permit
additional functions that affect the take reading workflow.
Delete Entire Reading
The field personnel may wish to abandon a reading that was earlier started either
intentionally or inadvertently. A confirmation prompt is displayed. Upon confirmation, the
Digital Inclinometer app permanently removes the reading from readings list.
A sample workflow of a delete readings process is shown in Figure 21.
Figure 21
– Delete reading
Modify Reading Options
The user may modify the filter or the display of the reading by tapping on the configure icon
located on the right corner of the top status bar. The Digital Inclinometer app displays the
following reading options:
•
Decimal digits
– the number of digits displayed.
•
Enable or disable audible notification
– the audible notification is generated each
time the reading is accepted.
•
Enable or disable averaging filter
– the averaging filter averages the most recent
readings to display a more stable reading.
•
Number of readings for averaging filter
– tf the averaging filter is enabled, this
parameter defines the number of recent readings to incorporate in the averaging
filter.
•
Show or hide noise bar
– This setting shows or hides the noise bar.
The changes to the reading options are only applied after tapping on the SAVE CHANGES
button.
A sample workflow of a modify reading options is shown in Figure 22.
