background image

 
 
 
 

 

11 

 

MAINTENANCE 

 

Clean the machine with a damp cloth without using any abrasive product. 

Do not leave machine in very humid places. Indoor use. 

Replace the rope if it is worn or broken, the blocks and the ropes are elements of wear by  the 
use of the machine. 

 

Spare parts:

 

https://einercial.com/en/categoria-producto/rsp-conic-en/

 

Call for assistance if required. +34 659910685 

 

REPLACING THE ROPE

                                                       

 

 

                      

https://bit.ly/RSPconictechnician

 

WARRANTY 

 

1. Inercial Performance, S.L. warrants to the purchaser that RSP conic is free of defects in 
materials and workmanship under normal use and maintenance, has a limited warranty of 2 
years from the date of purchase, subject to the terms and conditions that marks the Spanish law, 
after 6 months of this period the costumer will have to prove that the fault exists since the origin of 
the purchase  

2. This warranty does not cover any damage caused by  handling, misuse, tampering, 
negligence, accidents, abnormal conditions, lack of adequate maintenance or unauthorized 
service or alterations to the product. 

3. The blocks and the ropes are elements of wear by  the use of the machine, are not subject to 
this warranty except for manufacturing defect. 

4. In the event that the machine is damaged from the factory in the first 6 months after the 
purchase (point 1) will replace the defective part or be replaced the machine, if necessary, 
without any cost for our client. 

Содержание CONIC













Отзывы: