3
INTRODUCTION
The main characteristic of the Conical Pulley, due to the cone’s nature, is that the movement is
accelerated with progressive weight. The rope’s radius decreases as it moves across the cone,
progressively increasing resistance. The nature of the weight is inertial, that is, depending on how
much power the user applies to the machine, power values will be higher or lower. This feature
wide range of use of the subject, since we always work on percentages of individual power of
the user. We can practice a great variety of exercises, making it possible to train every muscle
group from a single machine by attaching different accessories to the end of the rope.
Moreover, this machine’s weight range is really wide.
We increase weight by working over the free cone radius with a roll-up rope, and also by shifting
the inertia moment using 4 integrated masses on the disk (they can be extracted).
The wider the radius, the lighter the weight; and the narrower the radius, the heavier the weight.
This regulation is performed through a lengthwise rail along the cone.
The moment of inertia is adjusted through the different masses integrated within the disk. There
are three possible positions.
STANDARD EQUIPMENT
-RSP Conic chassis
- 120cm wall rail for height adjustment of the output pulley
- Ground anchorage eyebolt for vertical shooting
- 4 aluminium masses
-Carbo Harken pulley 40mm Ø
- Carbo Harken pulley T2 Loop 40mm Ø
-4meters of high performance rope with lenght regulator
- Hand grip and ankle strap
-Assembly manual
-Wall mounting kit
