RSI SFCP Rail, Техническое руководство

Страница: 13 / 20

Version 03
– 30.10.2019
Seite 13 von 20
The rear of the SFCP Rail will have the following connections:
CONNECTOR X4:
1. FAULT Normally-closed connection
2. FAULT Normally-open connection
3. FAULT Common (engaged an any fault condition)
4. FIRE Normally-closed connection
5. FIRE Normally-open connection
6. FIRE Common (indicates upcoming extinguisher activation)
7. VFC Normally-closed connection
8. VFC Normally-open connection
9. VFC Common (engaged an single/dual* alarm)
(* = dipswitch setting)
CONNECTOR X3:
11. ALARM- : system ground
12. ALARM + : switched alarm output, same voltage as input +
13. IGNITION : 11-32 VDC switched ignition v
14. INPUT- : input ground
15. INPUT + : 11-32 VDC input voltage
16. GND : system ground
CONNECTOR X2:
17. BATTERY - : battery ground
18. B : same target voltage as Input +
CONNECTOR X7:
19. EXT HOLD- : external hold off Input -
20. EXT HOLD + : external hold off Input +
CONNECTOR X5:
21. GND : system ground
22. FIRE-EXTINGUISHER - : output -
23. FIRE-EXTING : regulated for monitoring
and activation of the extinguisher
CONNECTOR X6:
24. EXT RELEASE- : external release extinguishing Input
25. EXT R : external release extinguishing Input
26. ZONE2B : detector zone2 sense and GND
27. ZONE2A : detector zone2 +, input power output, 50mA max.
28. ZONE1B : detector zone1 sense and GND
29. ZONE1A : detector zone1 +, input power output, 50mA max.