MAINTENANCE
Cleaning
Keep the SpotDAP unit free of dust accumulation. To clean the emitter surface,
use only low pressure (less than 10 PSI) compressed air, available in small
spray cans from an electronics store. Use only a dry cloth to remove dust
from the exterior of the SpotDAP unit. DO NOT attempt to clean the surface of the
emitter with anything other than compressed air at less than 10 PSI.
Servicing the HSS unit
The SpotDAP unit has no user-serviceable parts. Contact RSF if service is
required.
!
Maintain the environmental requirements as outlined in the
section on Installation and Setup, and the Safety Instructions.
The power to restrict sound to a specific area without imposing on nearby
activities has endless possibilities for use. The SpotDAP uses HyperSonic Sound
®
(HSS
®
), a pioneering sound-generation technology that gets your audio message
right to your audience. The HSS technology, a highly directional ultrasonic
column places sound only where it is intended. Sound does not spread to the
sides or rear of a SpotDAP unit, eliminating the problem of uncomfortable and
unwanted noise pollution produced by conventional speakers.
Directory kiosks in a shopping mall
Store displays introducing a new product
Art display information directed to patrons at art museums
Directions at an amusement park
Display booths at trade shows
Speakers in an office space
Internet access kiosks in public areas
Audio/video conferences in different languages from a single device
Point-of-purchase advertising, or language-department messaging
Providing hearing impaired sections in churches and schools
HSS technology can be used anywhere noise abatement requirements
preclude general broadcast address, but communications are required.
SpotDAP can transform signs, placards, and surfaces into virtual speakers. Virtual
Mode applications allow units to be placed without cabinet or hardware at
the desired sound location. By projecting sound with a SpotDAP unit, a simple
display sign can act as a speaker without wiring or changing the sign’s
appearance. You can beam the SpotDAP sound to specific endcaps or aisle displays
or send sound across the room, without uncomfortable and unwanted volume
from loudspeakers. SpotDAP can turn a wall into an information sound center by
adding sound to coupon panels and directional signage to increase interest.
The superior control that SpotDAP offers will grant freedom to use sound as never
before to audio engineers, architects and environmental designers. Audio use
will be well-defined and more impactful with highly controlled audio
placement, selective access to that audio, and freedom from the need to use
high levels of sound to get audio across a distance.
APPLICATIONS
15
8
RSF (France)
45, av. Marcel Dassault Parc de la Plaine
F-31500 TOULOUSE FRANCE
PHONE: +33 5 61.20.79.09
E-MAIL: [email protected]
www.rsf-int.com
RSF EUROPE (International)
10 B, route d'Arlon L-7471 SAEUL, G.-D. LUXEMBOURG
PHONE: +352 49.74.20.40
FAX:
+352 49.74.20.50
E-MAIL: [email protected]
