RS RS-1384, Инструкция по эксплуатации

Страница: 9 / 15

OPERATION INSTRUCTION / EN
09/16/11 Version No. 00 EN-7
4. OPERATION INSTRUCTION
WARNING
Before using the meter inspect the case. Do not use the meter if it appears damaged.
Look for cracked or missing plastic. Pay particular attention to the insulation around the
connectors.
Disconnect thermocouples from the meter before opening the case.
Replace the batteries as soon as the battery indicator “ ” appears as accurate
measurements may no longer be possible.
Do not use the meter if it operates abnormally. Protection may be impaired.
Do not operate the meter around explosive gas, vapour or dust.
Do not use the meter with any part of the case or cover removed.
4-1 Setting the Meter
1. Real – Time setting:
(a). Press “ ” key to turn on the meter.
(b). Press “SET” key to enter the setting mode, the “Set clock” and “ SET ” symbols are
displayed.
(c). Press “
↵
↵↵
↵
” key to enter the real – time setting mode, the two year digits will flash.
(d). Press or key to set the year of the real – time.
(e). Press “
↵
↵↵
↵
” key, to store the year and select month.
(f). Press or key to set the month of the real – time.
(g). Press “
↵
↵↵
↵
” key, to store the month and select day.
(h). Press or key to set the day of the real – time.
(i). Press “
↵ ↵↵ ↵
” key, to store the day and select hour.
(j). Press or key to set the hour of the real – time.
(k). Press “
↵ ↵↵ ↵
” key to store the hour and select minutes.
(l). Press or key to set the minute of the real – time.
(m). Press “
↵
↵↵
↵
” key to store the minutes and select seconds.
(n). Press or key to set the second of the real – time.
(o). Press “
↵
↵↵
↵
” key to store the seconds.
(r). Press “SET” key to exit this mode.
2. Interval
–
Time setting:
The logging interval time determines how often the meter stores logged readings in
memory.
(a). Press “ ” key to turn on the meter.
(b). Press “SET” key to enter the setting mode, then press or key until the display
shows “Set Intr”.