RS RS-1384, Инструкция по эксплуатации

Страница: 12 / 15

OPERATION INSTRUCTION / EN
EN-10 09/16/11 Version No. 00
4-5 Manual Data Memory and Read Function Operation
1. Clearing the manual memorized data
(a). Press “ ” key to turn off the meter.
(b). Press and hold down “MEM” key, then press “ " key again to turn on the meter, the “CLr
YES no M” symbol is displayed.
(c). Press
⊳
or key to select “YES” symbol is displayed flashing.
(d). Press “
↵ ↵↵ ↵
” key to clear the manually stored data.
(e). Press “
↵ ↵↵ ↵
” key again to exit this mode.
2. Store manual data to memory
(a). Press “MEM” key once to store the sets of measured data to memory, the “M” symbol
will vanish as the stored memory address is displayed.
(b). Maximum store memory capacity size is 99 sets.
3. Read the manually stored data
(a). Press “READ” key to enter the read mode, the “R” symbol is displayed.
(b). Press or key to read the data, the memory data address will be displayed.
(c). Press “READ” key again to exit this mode.
4-6 Auto Datalogging Function Operation
1. Clear the Auto datalogged data:
Before entering the clear memory data mode, please ensure any previous memory data is
first downloaded to a PC.
(a). Press “ ” key to turn off the meter.
(b). Press and hold down “MEM” key, then press “ ” key again to turn on the meter, the “CLr
YES no M” symbol is displayed.
(c). Press “
↵
↵↵
↵
” key to enter the clear auto datalogged data mode, the “CLr YES no AM”
symbol is displayed.
(d). Press
⊳
or key to select “YES”, the symbol is displayed flashing.
(e). Press “
↵
↵↵
↵
” key to clear the data and exit this mode.
2. Store Auto datalogging data to memory:
(a). Press “MEM” key for 3 seconds to start auto datalogging, the “A-M” symbol is
displayed. The “A-M” symbol will Flash according to the interval time previously set,
and store one data set into the memory.
(b). Press “MEM” key for 3 seconds to stop data recording, the current block number will
be displayed for one second. Press “MEM” key again for 3 seconds to resume data
recording, the total maximum record capacity size is 36,000 data sets using all 4
thermocouple temperature measurement inputs. (100,000 sets of data using only 1
input). The maximum number of blocks is 255 blocks.
(c). When maximum block or maximum capacity is reached, the “FULL” symbol will be
displayed and data recording is automatically stopped.