MEASURING PROCEDURE
/
EN
10/15/10 Version No. 00
EN-7
3-5 Maximum & minimum recording measurement:
Press the “MX/MN” button to enter recording mode and
the auto power-off function will be disabled. If the
auto-timer datalogging function
is not set, the timer will
be started from zero.
Press the “MX/MN” button to alternate the display
between maximum (MAX) and minimum (MIN) readings.
Press the SET button to alternate the display between
elapsed time and the real time of the Maximum or
Minimum values displayed on the LCD. When in auto-
timer datalogging setting mode, the displayed elapsed
time will be replaced by real-time.
4 sets of data are recorded, including the main reading
and subsidiary reading as follows:
Max. humidity reading with its associated temperature reading.
Min. humidity reading with its associated temperature reading.
Max. temperature reading with its associated humidity reading.
Min. temperature reading with its associated humidity reading.
When this mode is selected, the dew-point or wet-bulb
temperature may be read by pressing the DEW or WET
button respectively.
Press the “MX/MN” button and hold it down for 2
seconds to exit MX/MN and Time mode.
