RS RS-1365, Инструкция по эксплуатации

Страница: 16 / 19

MEASURING PROCEDURE / EN
EN-14 10/15/10 Version No. 00
When the auto-timer datalogging function is enabled, the
LCD will show the "
" auto-timer mark and an "M" mark.
The “M” mark will flicker each time data is stored to
memory.
Ⅲ
Ⅲ Ⅲ
Ⅲ
. Display the preset start-time.
In auto-timer datalogging mode:
(1). Press the " " button and the LCD will show the start-time.
(2). Press the " " button and the LCD will show the stop-Time.
Ⅳ Ⅳ Ⅳ Ⅳ
. Disable the auto-timer recording function.
Press the "
↵ ↵↵ ↵
" enter button to exit auto datalogging and
the auto-timer mark " " will disappear and erase the
auto-timer settings.
Ⅴ Ⅴ Ⅴ Ⅴ
. Download the auto-timer recorded data to a PC.
Connect the optical RS-232 to USB cable to the PC and
press the "
" button to download the memory data to the
PC.
Note: When the auto-timer function is enabled, the start
and stop times are valid for every day and the
instrument will record on a daily basis until
cancelled or the memory is full.
The auto-timer recorded data can only be read by
downloading the data to a PC. It cannot be read directly
from the LCD display.