RS RS-1365, Инструкция по эксплуатации

Страница: 17 / 19

MEASURING PROCEDURE / EN
10/15/10 Version No. 00 EN-15
3-8 Manual data memory and read mode:
A. Clear the manual memorized data
Press the “ ” button to turn the meter off.
Press and hold down the "MEM" button, then press the
“ ” button to turn the meter on. When the LCD shows
"CLr", the memorized data has been erased.
B. Manual data memory
Press the "MEM" button to manually store one set of
readings to memory. The LCD will show the "M" mark
and the memory address number. Total memory size
available is 99 sets.
When the memory is full, the LCD will show the "Full"
mark.
C. Manual memory data READ
Press the "READ" button to enter READ mode and the
LCD will show the "R" mark and the memory address
number.
Press the " " or " " button to select the desired
memory address number to display.
Press the "DEW" or "WET" button to display the DEW
point or WET bulb temperature reading on the main
display as required.
Press the "
↵
↵↵
↵
" enter button to exit this mode.