RS SAILING VENTURE CONNECT SCS, Инструкция по установке

Страница: 4 / 4

Using the m4 x 30mm CSK bolts,
Washers and Nyloc nuts from the kit,
fi t the webbing bridges.
NOTE: Do not over tighten the bolts.
Fitting the Mainsheet Cover
Fitting Webbing Bridges
1
2
Place the mainsheet cover over the
rear of the boat.
Make sure the
mainsheet bridle and shock cord
take up are on top of the cover
.
Thread each strap through the
webbing bridges. Make sure the cover
is square and centrally located.
1. Insert the 2 battens into the cover.
2. Fold over the tensioning strap and secure it back under the cover onto the velcro
Fitting the Mainsheet Cover
Fitting Mainsheet Cover