RS SAILING RS Tera, Руководство по монтажу

Страница: 18 / 43

6
5. To remove the rudder , simply push the rudder retaining clip in towards the transom , and
slide the rudder stock upwards.
Make sure that you thread the shock-cord retainer through the hole in the daggerboard
handle and tie a knot on a knot. Note warning sticker on the daggerboard.
Please note comments in Section 5.2 regarding water ingress in foils
TIME TO GO SAILING!!
After launching , the rudder is lowered by releasing the uphaul line and pulling the elastic
tight. The daggerboard can be inserted in the daggerboard case when the water is deep
enough. It is normally best to leave the kicking strap loose while launching, pulling it on as
appropriate once you are sailing.
TOP TIP
Make sure that you un-cleat the rudder and raise the daggerboard before coming in