10
3.6 - Rigging the mast
Ensure that the sleeve and the inside of the tube are clean and free of debris. Neo rigs
are designed with a tight engineering tolerance on the sleeve.
Ensure the tubes are aligned and push together. (The first part is often the hardest
due to misalignment). If the tubes are hard to push together spray with maclube or a
similar product.
a)
b)
Halyard
(thick end)
Halyard
(thin end)
Add plastic bobble to
halyard.
Halyard tail
Tie the thick and thin part of the main halyard
together with
knot #5
.
The thick section of the Main Halyard has two
distinctive ends. One end has the core removed
from the rope and is of reduced diameter. This is
the end that attaches to the thin halyard tail. The
thick end attaches to the plastic bobble.
To keep things neat while
stepping the mast you can add
the main halyard and tail to the
lower cleat.
c)
d)
Pass the halyard tail through
the bullseye at the top of the
mast.
Содержание RS Neo
