RS Fiber Amino Willow, Руководство пользователя

Страница: 20 / 25

RS Fiber Video Service Remote and Codes
20
Locking Channel Control for Specific Device Modes
To set Channel Lock for some device modes, but not others, you must first follow the steps under “Unlocking Channel Control.” Then follow the steps
below:
1. Press the mode key that corresponds to the device you wish with to command for channel-changing functions. The mode LED (e.g., TV) blinks
once.
2. Press and hold
SETUP
until the mode LED (e.g., TV) blinks twice.
3. Enter
9 7 3
. The mode LED (e.g., TV) blinks twice.
4. Press each mode key that you do not use for channel-changing functions. These are the modes in which the channel-changing functions will
control the device related to the mode key you pressed in step 1. Any mode omitted from this step has all channel controls assigned to that
mode’s device.
5. Press
SETUP
to save. The mode LED blinks twice.
Unlocking Channel Control
To unlock Channel Lock and thus allow the channel control functions to work with the device associated to the active operating mode, follow these
steps:
1. Press and hold
SETUP
until the mode LED blinks twice.
2. Enter
9 7 3
. The mode LED blinks four times.
3. Press
CH-
once. The mode LED blinks four times.
Now the channel functions correspond to the active mode (e.g., press
CH+
in TV mode and the TV changes channel accordingly).
Programming Macro keys
The Titan Remote Control includes two macro keys (
F1
and
F2
, located directly below the
INPUT
key at the bottom of the remote). Macros allow
you to record a series of key-presses and have the whole series of functions execute each time the related Macro key is pressed. For example, you
can set up a key macro to power on your TV and DVD player, change inputs on the TV, and go to the main menu on the DVD player all with the touch
of one macro key. If you want to change the macros stored in a previously programmed macro key, you’ll need to clear the key first (see “Clearing a
Macro Key”).
Programming a Macro key
1. On the remote control, press and hold
SETUP
until the mode LED blinks twice.
2. Enter
9 9 5
. The mode LED blinks twice.
3. Select a macro key (for example,
F1
) and press it once. The mode LED blinks once.
4. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press
TV
,
POWER
,
VOL+
,
VOL+
,
VOL+
....
- You can program up to 15 key presses into one macro.
5. Press and hold
SETUP
until it blinks twice. Now the macro is saved to the assigned macro key.
6. To add another macro, repeat steps 1 through 5 for the other macro key and the new key sequence that you wish to assign to that macro key.
- Programming more than five macros on the same macro key overwrites previous settings.
Clearing a Macro key
1. On the remote control, press and hold
SETUP
until the mode LED blinks twice.
2. Enter
9 9 5
. The mode LED blinks twice.
3. Press the macro key you want to clear once.
4. Press and hold
SETUP
until the mode LED blinks twice.
This macro key is now clear and ready for reprogramming.