RS Fiber Amino Willow, Руководство пользователя

Страница: 19 / 25

RS Fiber Video Service Remote and Codes 19
Programming Volume lock
Volume Lock allows you to set your remote to direct all volume commands to whichever home theater device you designate as your audio source. By
default, Global (All) Volume Lock is set to TV, so you can control TV volume while in any mode on your remote. You can also perform Volume Lock on
a selected device or set of devices to set Volume Lock to function on some modes, but not on others.
Locking all Volume Control to a Single Device
To change the Global Volume Lock setting from TV (default) to another device, follow these steps:
1. Press and hold
SETUP
until the mode LED blinks twice.
2. Enter
9 9 3
. The mode LED blinks twice.
3. Press
VOL+
once. The mode LED blinks once.
4. Press the mode key for the device that you wish volume functions to control. The mode LED blinks twice.
Now pressing
VOL+
,
VOL-
, or
MUTE
controls only that device’s volume, regardless of operating mode.
Locking Volume Controls for Specific Device Modes
To set Volume Lock to occur for some device modes, but not others, you must first follow the steps under “Unlocking All Volume Locks.” Then follow
the steps below:
1. Press the mode key for the device that you wish volume functions to control.
2. On the remote control, press and hold
SETUP
until the last-selected device key blinks twice.
3. Enter
9 9 3
. The mode LED blinks twice.
4. Press each mode key that relates to the devices that you do not use for volume control. These will be the modes in which the volume functions
control the device related to the mode key you pressed in step 1. Any mode omitted from this step will have all volume controls assigned to that
mode’s device.
5. Press
SETUP
to save. The mode LED blinks twice.
Unlocking all Volume Locks
Performing these instructions sets independent volume control for all programmed devices (e.g., when in DVD mode, the
VOL
and
MUTE
keys send
commands to the DVD player).
1. On the remote control, press and hold
SETUP
until the mode key LED blinks twice.
2. Enter
9 9 3
. The last-selected device key blinks twice.
3. Press
VOL-
once. The mode LED blinks four times.
Now, volume functions are controlled through whichever device mode is active on the remote control.
Programming Channel lock
By default, the remote control’s channel-control capabilities are locked to the set-top box supplied by your service provider. The affected keys* are
1
through
0
,
CH+
,
CH-
, and
LAST
. This will guarantee that you do not inadvertently change a channel on your TV or VCR while watching broadcast
programming on your set-top box. However, you can de-activate this feature to allow full access to these keys to control the device associated with
the active mode.
Locking all Channel Control to one Device
To lock all channel-control functions to a specific device, follow these steps:
1. Press and hold
SETUP
until the mode LED blinks (e.g., TV) twice.
2. Enter
9 7 3
. The mode LED (e.g., TV) blinks twice.
3. Press
CH+
once. The mode LED (e.g., TV) blinks once.
4. Press the mode key for the device that you want to use for channel-changing. The mode LED blinks twice.
Now, regardless of what mode you select, the channel keys will only change channels on the assigned device.