To
Power Pack
TRACK
Terminals
To
Power Pack
ACCESSORIES
Terminals
Attach to
TRACK
Station Stop Hookup Diagram
Place MAGNET
on bottom of engine.
Add additional sensors in PARALLEL
for additional station stops.
For a simple station stop, this is all you need to do!
Make sure to program the YardMaster for the desired time delay.
When the power supply unit is turned on the train should run. If it does not then trigger
the alternate sensor by briefly touching contancts 3 and 4 together with a piece of wire.
This is a one-time operation since the YardMaster will remember the switch state when it
is power cycled
Change direction of train as required. The YardMaster will operate in both directions.
Adding a signal light is optional, but adds to the fun.
Y
M
ard
aster
Turnout Controller - Lamp Driver - Power Switcher
RR-Concepts.com
1
2
3
4
5
6
20
19
18
17
16
15
7
11
8
12
9
13
10
14
YardMaster Power
Switch Common
Switch A
Sensor
Switch B Terminals
RR-Concepts.com
Common
Suggested
f for track
connections
Station
Stop
