M
ICRO
M
AG
-OP-EN
- 13 -
INSTALLING EDGE PADS:
1. Turn off machine power
(make sure that scrub deck
is raised off of the ground)
. Remove Key if Option
equipped.
2. With empty Tanks and Squeegee removed, tip ma-
chine back and rest on Triangle Plate.
3. Select the correct Pads that best meet your cleaning
application. Consult your local dealer for assistance.
4. Remove any Pad previously attached to the EDGE
Grip Face by pulling down from the corners
(SEE
BELOW)
.
5. Once Grip Face is clear of any Pads, place Pad want-
ed for application centered on the Grip Face
(This will
leave a
½
'' overhang on all sides)
(SEE BELOW)
.
6. Press upwards on the Pad to secure it in place.
7. With Pad attached securely to Grip Face of EDGE
Deck, tip the machine back to standard sitting position
and reattach Squeegee for machine to be ready to
use.
ADJUSTING PAD ASSIST BIAS:
1. Release
(2
×
) Tank latches
(A)
(SEE BELOW)
.
2. Tip
Tank
back
(SEE BELOW)
.
3. Turn the Pad Assist Adjustment wing nut
(B)
to the
right to increase bias and to the left to decrease
(SEE
BELOW)
.
A
B
