User manual
Thank you for purchasing RPC products.
Please read user manual before putting in function this product.
Do not allow liquid or any foreign object to get inside
the UPS.
Do not plug appliances, such as hair dryers, into the
UPS receptacles.
Do not place the UPS under direct sunshine or close
to heat-emitting source.
The power socket should be installed near the
equipment and be easily accessible. To isolate from
AC input, disconnect the plug into power cord.
For a longer run-time connect the printer directly to
wall receptacle instead of into the UPS. (Laser printer
can’t be connected to the UPS.)
If the UPS is not plugged into the Mains the battery
will discharge. It will damage if long-term no use,
which won be covered in our warranty.
CAUTION:
Ÿ
The UPS contains voltages that are potentially
hazardous. All repairs should be performed by
qualified service personne.
Ÿ
The UPS has its own internal energy source
(battery). The output receptacles may be live even
when the UPS is not connected to an AC supply.
The safe and continuous operation and use of the UPS
depends entirely on the care taken by user. Please
observe the following precautions.
Ÿ
Do not disassemble the UPS.
Ÿ
Do not attempt to power the UPS from any
receptacle except a 2-pole 3-wire grounding
receptacle.
Ÿ
Do not place the UPS near water or in environment of
excessive humidity.
SAFETY INSTRUCTION
04
1. INTRODUCTION
Protector 901
1000 VA