18
Close the visor making sure it LATCHES
SECURELY to the front of the jaw. Listen for
the visor latching over the tab on the front of
the jaw.
To replace the Safety Lens, lift up the visor,
unlatch the inner visor from the outer visor
and open them apart.
Close the outer visor over inner visor and
lens, making sure the latches at the corners
are secure.
Pull out the lens and insert a new Safety Lens
making sure the tabs of the lens are in all four
attachment points on the visor and the lens
is inside of the guide along the bottom front
edge of the visor.
LENS REPLACEMENT
FIGURE 3.1
FIGURE 3.2
FIGURE 3.3
FIGURE 3.4
RESPIRATOR SETUP AND CARE - STANDARD
CONFIGURATION
CONTINUED
