38
7.0 MAINTENANCE
7.2
New Belt Break-In Process
New CVT drive belts require a break-in period of at minimum
30 miles to maximize belt life and performance. The goal of
the break-in period is to properly wear in the belt to match the
sheaves before applying maximum engine torque. By
conservatively running through the entire shift range, proper
belt contact over the entire sheave/belt contact path is
optimized to eliminate belt slippage and drastically increase the
belt’s lifespan.
Follow these guidelines to
accomplish proper belt break-in:
(1)
Vary vehicle speed and engine RPM to shift belt through
normal operational range.
(2)
Do not exceed ¾ throttle within the first 30 miles of
installation.
(3)
Stop engine and allow belt to cool down every 15
minutes of use.
During break-in period, the following
activities SHOULD BE AVOIDED:
•
Aggressive Acceleration or ‘Jerky’ throttle movements at
low speeds.
•
Holding engine/vehicle speed constant for extended time
periods.
•
Pulling Heavy Loads.
•
Long run times without complete CVT/belt cool down.
Содержание STRIKE-C
