royer R-122V Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 33

background image

and detail, and a lushness that is hard to describe. The R-122V
also has an enormous amount of headroom available, making it
useful on extremely loud applications. Phantom powered
microphones are limited with regard to maximum

headroom as

a result of the phantom power source. With the vacuum tube
design, greater headroom is achievable because the voltage source
is supplied by a dedicated power supply. The vacuum tube operates
with a supply voltage greater than twice that of a phantom powered
microphone. The vacuum tube also provides the extremely high
input impedance required for the specialized ribbon matching
transformer and offers transient response superior to any solid-
state component.

Key points:

• No longer is it necessary to mate a ribbon microphone to an
ultrahigh gain, low noise preamplifier for optimum performance.
Any preamplifier of nominal gain will provide good results with
the R-122V.

• No longer is it necessary to carefully consider impedance
matching characteristics when choosing a preamplifier. Microphone
loading is a non-issue (although we still suggest that the load is
above 2,000-ohms for optimum technical performance).

• No longer is it necessary to be concerned about damaging the
ribbon element with phantom power. The vacuum tube electronics
completely isolate the ribbon element.

• No longer is it necessary to worry about the effects of long cable
runs degrading the performance of your ribbon microphone. The
vacuum tube electronics provide a robust low impedance signal
that can handle long cable lengths without loss of signal.

4

«
...
3
4
5
6
7
...
»

Содержание R-122V


































Отзывы:

Нет отзывов

Похожие инструкции для R-122V

Бренд: Icom Страницы: 8

Бренд: Icom Страницы: 6

Бренд: KAM Страницы: 4

Бренд: DAPAudio Страницы: 12

Бренд: Antelope Страницы: 13

Бренд: Devine Страницы: 15

Бренд: Mainlink Страницы: 46

Бренд: Enersound Страницы: 6

Бренд: Audio Technica Страницы: 2

Бренд: Audio Technica Страницы: 1

Бренд: Audio Technica Страницы: 2

Бренд: Audio Technica Страницы: 4

Бренд: Saramonic Страницы: 29

Бренд: Icom Страницы: 2

Бренд: Icom Страницы: 2

Бренд: Iva Страницы: 4

Бренд: XWire Страницы: 6

Бренд: Conrad Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды