Royalty Line HVC-150.55R, Инструкция по эксплуатации

Страница: 24 / 85

Upholstery Brush
This nozzle is especially good for gentle cleaning of larger
susceptible surfaces.
Assembly the Wall Holder
Inserting the Plug of the Power Supply Unit
If you want to use the wall holder also as the charging station,
attach the plug of the power supply unit first. Refer to the
illustrations (A to C) on page 3.
NOTE:
● Turn the plug at the metal end, not at the cable. Use a
pliers if necessary.
● There is an opening at the rear of the wall holder. You can
the plug additionally with a finger through this opening.
1. Set the plug of the power supply unit with the flattened side
into the wall holder. (Fig. A)
2. Turn the plug of the power supply unit by 90 °. It must sit
solidly in the holder and sliding no longer shall be
possible. (Fig. B)
3. Fix the cable in the cable guide. (Fig. C)
Fastening the Wall Holder
WARNING:
Make sure beforehand whether there are cables in the wall
which could be damaged!
CAUTION:
Place the wall holder so that the appliance is not exposed to
direct sunlight or other heat sources.
NOTE:
A power outlet must be near.