Royalty Line EMG-9, Инструкция по эксплуатации

Страница: 11 / 40

manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
• The blade is sharp, always pay close attention in using.
• Put the appliance in flat and firm surface.
• Never let it near or close to the open fires or inflammable issues.
• The attachments were intended by manufacturer. Do not try to
replace or change them or for other purpose.
FOR THE FIRST TIME
• Check that voltage indicated on the rating label corresponds the
mains voltage in your home.
• Wash all parts (except body) in warm soapy water.
• Before plugging in, ensure the ON/OFF/Reverse switch is turned to
"OFF" position.
INSTRUCTION
FOR USE
ASSEMBLING
• Hold the head and insert into the head
inlet, screw the fasten handle clockwise
till it’s tight ( fig.1,fig 2)
• Place the snake into the head, turn it
slightly until it is set into the motor
housing (fig.3).
• Place the cutting blade onto the snake
shaft , Attention : the cutting side must
face out (fig.4).
If it is not fitted properly, meat will not
be grinded.
• Place the desired cutting plate next to
the cutting blade, fitting protrusions in
the slot (fig.5).
• Support or press the centre of the
cutting plate with one finger then screw
the fixing ring tight with another hand
(fig.6). Do not over tighten.
OFF
OFF
OFF
OFF
OFF
OFF
OFF