Royalty Line EMG-9, Инструкция по эксплуатации

Страница: 10 / 40

• Do not grind hard food such as bones, nuts, etc.
• Do not grind ginger and other materials with hard fiber.
• Continuous runmng of meat grinder should be not more than 3min.
Before it's used again, it must cool down enough, About 3min.
• Reverse function is prohibited while the appliance is operating (For
example switch "ON" knob to "R" knob or on the contrary), wait at
least one minute until grinder has come to a complete stop,
otherwise it may cause an abnormal noise, vibration or a transitory
electric spark in the appliance. It could result easily damage to
appliance and make a user frightened.
• After use, there would be a little food left in the grinder head. This is
normal. There might be a bit of black metal powder adhering to the
food ground in the end. Please pick them out and throwaway, do
not eat them.
• To avoid jamming, do not force to operate the unit with excessive
pressure.
• Never try to replace the parts and repair the unit by yourself.
• When the appliance is not in use and before cleaning, unplug the
appliance from the outlet.
• To protect against the risk of electrical shock, do not immerse the
unit, cord or plug in water or other liquid.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Always make sure the voltage indicated on the rating label
corresponds the mains voltage in your home.
• Children should be supervised to ensure that they do not play with
the appliance.
• Cleaning and user maintenance shall not be made by children unless
they are older than 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than
8 years.
• The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
• If the supply cord is damaged, it must be replaced by the