14
RN6 Users Manual
2.3. How to Use Car Holder
Car holder side views
NO Function
Description
1
USB Port/Docking connector
(Optional)
The mini-USB connector of car cradle can be used to
charge power only. It can not be charged by USB
device cable.
2.4. How to Use Mounting Bracket
RN6 comes with a car mount kit and a car charger to help install your device in your vehicle.
The car mount kit uses a suction cup on the windshield to offer flexible mounting options for
RN6.
WARNING:
Some countries prohibit the mounting of any electronic device on the vehicle
dashboard. Be sure to check your local laws for acceptable mounting areas before installing
the car mount bracket.
This section shows how to install the car mount kit in your vehicle’s windshield using the suction
cup. RN6 uses a snap on mounting cradle to use when the device attaches to the car mount.
Below is the backside view of RN6 in the cradle.
1. Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2. If the ambient temperature is below +15°C (60°F), you can warm the mounting area and
the suction cup (e.g. with a hair dryer) to ensure a strong suction bond.
3. Install the car mount on the selected area.
