INITIAL SETUP AND PROGRAMMING
SIX:
correct
hours and minutes can be programmed
the register If selected
an option
of Program One the
be printed on all transaction receipts and also on the X and Z reading printouts
To enter the hour press the appropriate numbers on the keyboard Then add the minutes by pressing the appropriate numbers on the
keyboard Press the
key to enter The correct
appear on the display
a dash mark separating the hour and minutes
NOTE The ER 145 utilizes a 24 hour clock The
must be entered by adding 12 to all hours
the
commonly called
international
The 24 hour clock ensures that the date
change at
midnight and also provides for more accurate sales data
the 2 hour periodic total readings
PROGRAM EXAMPLE The
to be programmed
3 45 P
45 hours)
PRESS DISPLAY
1545
GO ON TO STEP SEVEN
STEP SEVEN:
Tax Rate Computation The final step
to program the tax percentages for Tax 1 and Tax 2 according to the tax option selected
Program One
One of the following three (3) tax options should have been selected
Option 100
Option
— Tax 1 and Tax 2
be programmed as a fixed percentage tax rate
Option
— Tax 2
be programmed as a fixed percentage tax rate and Tax 1
be programmed as a state table tax rate
IMPORTANT — The procedure for programming the actual tax percentage
different for each option Follow the instructions for the tax
option that was selected
Tax Option
you chose
option
PGM 1 no further programming
necessary Proceed to
8 (Page 27)
GO ON TO NEXT PAGE FOR TAX OPTION
