![background image](http://html.mh-extra.com/html/royal/er-145/er-145_manual_1493956025.webp)
INITIAL SETUP AND PROGRAMMING
STEP FOUR:
Register Number — A register number can be programmed to appear on all receipts and on the X and Z reading printouts Only a two digit
register number can be used (0 99) If you only have one register
your store and do not
to number you can
over
step and
go on to step
Press the appropriate numbers on the
then press the [VOID] key
PROGRAM EXAMPLE The register number
selected
PRESS DISPLAY
12
FIVE
STEP FIVE:
Date
The correct date can be programmed
the register If selected as an option
Step 2 of Program One the date
be printed on
all transaction receipts and also on the X and Z readings The date needs to be programmed only once After the initial setting the date
automatically change every 24 hours In addition the register
pre programmed
a permanent four year calendar The month
automatically change after the last day of each month taking
consideration the varying number of days
each month
The date must be entered
the following sequence year month date Any single digit numbers for the month and day must be preceded by
zero
To program the date press the appropriate numbers on the keyboard then press the [CHARGE] key
PROGRAM EXAMPLE
June 18
be programmed
PRESS DISPLAY
840618 [CHARGE] 840618
NOTE Disregard decimal point If you choose to program date
must also be programmed to ensure date rollover
ON TO
SIX